Xerox 2515

REP 8.2 Upper Media Feed Roll .. YF
I
Parts List on (2510) PL 8.1 (251 5) PL 8.3
Removal AoVE r:MovE FEED
1. WARNING: Disconnect Power Cord
r
NOTE: When replacing
the rolls, ensure
1. Remove the media transport module (REP the part number
0, I),
lnbols nre on the
left,
2. (Figure 1): Remove the feed roll.
3. Install in reverse order.
I
MOVE THE FABRIC GUIDE
REMOVE
REMOVE FEED
CLlJTCH
Figure 1. Removing the Feed Roll
REP 8.2