Xerox 2515

REP 9.4 Cleaner Blade
I Parts List on PL 9.2
Removal
WARNING
Disconnect the power cord
1. Remove photoreceptor drum assembly
(REP 9.2).
2. (Figure 1): Remove transition gear and
weight.
NOTE: STEP 3 A: The cleaner blade
assembly
is spring loaded. Use care
when removing the transition gear.
3. (Figure 2): Remove the cleaner blade
assembly.
A B
MOVE, I{EMOVE' CIXANEII
BLADE ASSEMO1.Y
Figure 2.
Remove the Cleaner Blade
Assembly
NOTE: 2510 WIO Tag 10, see the change tag
index and order necessary parts to
upgrade the cleaner blade assembly.
4. 25 10 WtTag 10 and 25 15, continue this
procedure.
5. (Figure 3, Figure4): Remove the cleaner
blade.
REMOVE TI4E
CLEANER ULADE
Figure 3.
(2510 W/O Tag 25)
Remove the Cleaner Blade
REP 9.4