Xerox 900 series User Manual

PROGRAMMING
CONVENTIONS:
(cont. )
MEMORY
REQUIREMENTS:
SUBROUTI NES
USED:
b. When the Action Subroutine is one which does not require a sys-
tem routine to be loaded. Transfer (BRU) to RDMSGR to allow the
MONARCH Control Routine to obtain the next control message
unit.
c. When the Action Subroutine is one which loads a system routine
and
possibly one or more standard input/output subroutines}.
GSYSP (or a subroutine which performs the same functions as
GSYSP) should be executed and control ultimately given to the
MONARCH Loader (via the instruction: "BRM QSYLDR").
Variable. (Approximately 6048 or 388
10
for FORTACT and approxi-
mately 608 or 4810 for ALGOLA).
Any or all of the following subrouti nes can be referenced by an Action
Subroutine:
TYPM
LDIOSR
GSYSP
SRLDSY
QSYLDR
QSRCH
QBOOT
QFMR
93

Xerox 900 series Specifications

General

Brand	Xerox
Model	900 series
Category	Copier
Language	English