Xerox Adaptive CMYK+ Kit - Page 12

• While a job is processing, or while the Power Saver button is blinking, do not press the main
power switch. Doing so can damage the press hard drive or cause a press malfunction.
To power off the main power switch:
1. Open the front cover, then press the main power switch to the Off position.
2. Close the front cover.
Note: Before you switch on the power again, allow the press to remain off for a minimum
of 10 seconds.
For details, refer to the Xerox
®
Versant
®
180 Press User Guide.
12
Xerox
®
Adaptive CMYK+ Kit for the Xerox
®
Versant
®
180 Press
Accessory Reference Guide
Safety