Xerox Adaptive CMYK+ Kit User Manual

Removing the Toner Cartridges
Caution: Before you open a drawer in the storage cart, ensure that all drawers are closed. Do
not open more than one drawer at a time.
1. Before you remove any cartridges, protect the work area. Place paper on the floor so that any
excess toner falls on the paper.
2. Open the toner cover above the press front door.
3. Keep the cartridge level and avoid touching the bottom of the cartridge.
4. To remove each cartridge, grasp the cartridge handle, then pull the cartridge straight out of the
press. Store the toner cartridges in the cart.
Caution: Be careful to not spill toner on your clothing or your surroundings.
WARNING: Never use a vacuum cleaner when you clean spilled toner. An explosion can
occur as the toner fills the vacuum cleaner and creates sparks. To clean spilled toner, use a
broom or a cloth moistened with a neutral detergent.
26
Xerox
®
Adaptive CMYK+ Kit for the Xerox
®
Versant
®
180 Press
Accessory Reference Guide
Replacing a Toner Kit

Xerox Adaptive CMYK+ Kit Specifications

General

Brand	Xerox
Model	Adaptive CMYK+ Kit
Category	Printer Accessories
Language	English