Xerox Adaptive CMYK+ Kit - Changing the Toner Set on the Print Server

Changing the Toner Set on the Print Server
Note: Before changing the toner set on the Fiery
®
print server, update the EFI software on the
Fiery
®
print server.
To change the toner set, on the Fiery
®
print server, click Server→Toner Sets, then select the
appropriate toner set:
• Standard: Select this option when you have installed the standard (CMYK) toner set.
• Fluorescent: Select this option when you have installed the Fluorescent (C-fl, M-fl, Y-fl, and K)
toner set.
• Vivid: Select this option when you have installed the Vivid (WHT, GLD, SLV, and CLR) toner set.
For details, refer to the Customer User Addendum for Xerox
®
EX-i 180/EX 180 Print Server Powered by
Fiery
®
, version 1.2 Patch. You can download the Customer User Addendum from the Resources page
on the EFI website.
38
Xerox
®
Adaptive CMYK+ Kit for the Xerox
®
Versant
®
180 Press
Accessory Reference Guide
Replacing a Toner Kit