Xerox Adaptive CMYK+ Kit User Manual

Installing the Replacement Toner Dispenser
Assembly
Caution: Before you open a drawer in the storage cart, ensure that all drawers are closed. Do
not open more than one drawer at a time.
1. For easy access to the press frame, pull out the developer drawer assembly approximately 254
mm (10 in.).
2. From the storage cart, remove the toner dispenser assembly for the required toner kit.
3. Open the toner assembly door. Keep the toner dispenser assembly level as you line up the
alignment pins on the press with the alignment holes in the toner dispenser assembly.
4. Slide the toner dispenser assembly into the press. Push the assembly firmly into place.
5. Close the toner assembly cover.
32
Xerox
®
Adaptive CMYK+ Kit for the Xerox
®
Versant
®
180 Press
Accessory Reference Guide
Replacing a Toner Kit

Xerox Adaptive CMYK+ Kit Specifications

General

Brand	Xerox
Model	Adaptive CMYK+ Kit
Category	Printer Accessories
Language	English