To Next PageTo Next PageTo Previous PageTo Previous Page
Why authentication failed on Xerox All in One Printer?
Authentication can fail on your Xerox All in One Printer if the Domain Controller IP Address or Host Name is incorrect. To resolve this, verify that the server address is entered correctly. Also, verify that the Domain was configured properly. A network error can also cause this issue, so check that the network cable is connected firmly.
What to do if Xerox All in One Printer says passcode is incorrect?
If your Xerox All in One Printer indicates that the passcode entered was incorrect, carefully re-enter the PIN. Note that consecutive incorrect entries can lead to your card being locked.
What to do if the card reader is not detected on Xerox AltaLink B8045?
If the card reader is not detected on your Xerox All in One Printer, verify that the card reader is connected properly. If you suspect the reader has failed, try swapping it with a known working reader.
What to do if authentication failed on Xerox AltaLink B8045 due to server certificate?
This problem with your Xerox All in One Printer usually occurs because the device does not trust the certificates on the Smart Card. Ensure that all the chain of trust certificates are imported on the device. Check the Operators Smart Card to see which Root CA and Intermediate CA issued the Smart Card certificates.
How to fix invalid timestamp error on Xerox AltaLink B8045?
To fix the invalid timestamp error on your Xerox All in One Printer, verify that Network Time Protocol is set up correctly. If you are not using DHCP, verify the date and time and GMT Offset, or Time Zone is correct. Also verify that GMT offset is correct for Daylight Savings Time.
What to do if the card reader is installed but no message appears on Xerox All in One Printer?
If the card reader is installed but no message appears on the User Interface of your Xerox All in One Printer, it could be due to several reasons: * The card reader may be faulty, so try a different card reader. * The card reader connection may be faulty. Check that the cable is plugged in correctly, unplug the card reader cable, then plug it back in, or plug the card reader into a different USB port. * The card reader may not be compatible. Check that the card reader is on the list of compatible devices. * Smart Card access may not be enabled on the device. Use Internet Services to enable Smart Card through the Properties setup screens.
General| Print Speed | Up to 45 ppm |
|---|---|
| Monthly Duty Cycle | Up to 200, 000 pages |
| Automatic Duplexing | Yes |
| Control Panel | 10.1-inch color touchscreen |
| Functions | Print, Copy, Scan, Fax |
| Memory | 4 GB |
| Copy Resolution | Up to 600 x 600 dpi |
| Scan Resolution | Up to 600 x 600 dpi |
| Connectivity | Ethernet, USB, Wi-Fi |
| Scanner Type | Duplex Automatic Document Feeder |
| Copy Speed | Up to 45 ppm |
| Mobile Printing | Apple AirPrint, Google Cloud Print |
| Print Resolution | 1200 x 1200 dpi |
| Hard Drive | 320 GB (optional) |
Covers security controls for data resident within the device, including encryption.
Explains methods for securely erasing data from magnetic media.
Discusses encryption protocols like IPSec for secure network communications.
Covers 802.1X authentication and Cisco Identity Services Engine (ISE) integration.
Details measures to prevent unauthorized code execution and detect memory tampering.
Lists the various authentication modes supported by Xerox devices.
Covers authentication via external servers like LDAP, Kerberos, and SMB.
