To Next Page
S
Sarah ClarkAug 20, 2025
What to do if Xerox AltaLink B8170 All in One Printer is out of paper?
- HHeather Morales MDAug 20, 2025
If your Xerox All in One Printer is out of paper, simply load paper into the tray.
What to do if Xerox AltaLink B8170 All in One Printer is out of paper?
If your Xerox All in One Printer is out of paper, simply load paper into the tray.
How to fix network configuration problem on Xerox AltaLink B8170 All in One Printer?
Unplug the network cable. If the problem is not resolved, contact your system administrator to reconfigure your network installation.
What to do if Xerox AltaLink B8170 All in One Printer toner cartridge is empty?
Replace the empty toner cartridge.
What to do if Xerox AltaLink B8170 drum cartridge has reached end of life?
Replace the drum cartridge.
What to do if Xerox All in One Printer scanner is not communicating?
Power off the printer, and check the scanner cable. Wait two minutes and power on the printer again. If the problem is not resolved, contact your Xerox® service representative.
What to do if Xerox AltaLink B8170 All in One Printer has an error?
If the Status LED is blinking amber, follow the instructions on the control panel to clear the error. If the error persists, contact your Xerox representative.
What to do if Xerox AltaLink B8170 won't turn on?
First, open the front door and check that the main power switch is in the On position. Then, at the printer control panel, press the Power/Wake button. For details, refer to Power Options.
How to fix Xerox All in One Printer not printing?
• Ensure that the printer is connected to the network. • Determine if a print spooler or a computer sharing the printer is buffering all print jobs and then spooling them to the printer. Spooling can slow print speeds. • To test the printer, print an information page, such as the Configuration Report. If the page prints, there could be a network or printer installation issue. For help, contact the system administrator.
Why Xerox All in One Printer is busy?
If the Status LED is flashing blue, a previous print job could be the problem. At your computer, use the printer properties to delete all print jobs in the print queue.
What to do if Xerox All in One Printer is in Power Saver mode?
If your Xerox All in One Printer is in Power Saver mode, press the Power/Wake button on the control panel.
Read safety instructions carefully for continued safe printer operation.
General guidelines and power cord safety information for electrical safety.
Guidelines for safe printer operation, including handling and placement.
Overview of printer components including front and internal parts.
Overview of printer installation, setup, location selection, and software updates.
Managing active, secure, and completed print jobs.
General safety precautions for printer maintenance, including warnings about hot parts.
Procedures for locating and resolving printer problems, including restarting the printer.
Guidance on locating, minimizing, and clearing paper jams in various printer areas.
Identifying and troubleshooting print, copy, and scan quality problems.
General| Category | All in One Printer |
|---|---|
| Memory (Standard) | 8 GB |
| Energy Star Certified | Yes |
| Functions | Print, Copy, Scan, Fax |
| Hard Drive | 320 GB |
| Duplex Printing | Yes |
| Connectivity | Ethernet |
| Scan Resolution | 600 x 600 dpi |
| Copy Resolution | 600 x 600 dpi |
| Network Connectivity | Ethernet |
| Operating System Compatibility | Linux |
| Print Speed (Black) | Up to 70 ppm |
| Copy Speed | Up to 70 ppm |
| Mobile Printing | Apple AirPrint, Google Cloud Print, Xerox Print Service Plug-in for Android, Mopria |
