Off Mode
If this product has an off mode which still consumes a small amount of power, then to completely stop
product power consumption, disconnect the power supply cord from the electrical outlet.
Total Energy Usage
It is sometimes helpful to estimate the total product energy usage. Since power consumption claims are
provided in power units of Watts, the power consumption should be multiplied by the time the product
spends in each mode in order to calculate energy usage. The total product energy usage is the sum of
each mode's energy usage.
Telecommunication
Regulatory
Notices
Regulatory Notices for Telecommunication Terminal Equipment
This section contains regulatory information pertaining to products that contain the analog facsimile card.
FCC Requirements Notice to Users of the US Telephone Network
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the
Administrative Council for Terminal Attachments (ACTA). On the back of this equipment is a label that
contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If
requested, this number must be provided to your telephone company.
This equipment uses the RJ-11C Universal Service Order Code (USOC) jack.
A plug and jack used to connect this equipment to the premises’ wiring and telephone network must
comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. Use a compliant
telephone cord (RJ-11) that is26 AWG or larger when connecting this product to the public switched
telephone network. See your setup documentation for more information.
The Ringer Equivalence Number (REN) is used to determine the number of devices that may be
connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing
in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0).
To be certain of the number of devices that may be connected to a line, as determined by the total RENs,
contact your local telephone company. For products approved after July 23, 2001, the REN for this
product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits
represented by ## are the REN without a decimal point (for example, 03 is a REN of 0.3). For earlier
products, the REN is shown separately on the label.
If this equipment causes harm to the telephone network, the telephone company will notify you in
advance that temporary discontinuance of service may be required. If advance notice is not practical, the
telephone company will notify the customer as soon as possible. You will also be advised of your right to
file a complaint with the FCC.
The telephone company may make changes in its facilities, equipment, operations or procedures that
could affect the operation of this equipment. If this happens, the telephone company will provide
advance notice in order for you to make necessary modifications to maintain uninterrupted service.
To Next Page
Loading...
