Xerox C8170 User Manual

LLooaaddiinngg tthhee EEnnvveellooppee TTrraayy
You can use the optional Envelope Tray in place of Tray 1. The Envelope Tray is a dedicated tray. For
supported envelope sizes, refer to Supported Paper.
Note: For information on installing the optional Envelope Tray, refer to the Hardware Install
and Setup Instructions that are included with the Envelope Tray kit.
To load the Envelope Tray:
1. Pull out the Envelope Tray until it stops.
2. Load the envelopes in the tray, face up with the flaps closed, and flaps toward the left.
Note: For 6 3/4 Envelopes and short-edge feed custom envelope sizes, load envelopes with
the flaps closed, and flaps toward the front.
3. Adjust the paper guides so that they rest lightly against the edges of the envelopes. Ensure that
the maximum fill line is visible or that there are no more than 50 envelopes loaded in the tray.
210
Xerox
®
AltaLink
®
C81XX Series Color Multifunction Printer
User Guide
Paper and Media

Xerox C8170 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Duplex Printing	Standard
Monthly Duty Cycle	Up to 300, 000 pages
Recommended Monthly Print Volume	Up to 50, 000 pages
Scan Resolution	600 x 600 dpi
Fax Speed	33.6 Kbps
Control Panel	10.1-inch color touchscreen
Print Speed	70 ppm
Print Resolution	1200 x 2400 dpi
Connectivity	USB, Ethernet, Wireless
PDL	PCL 6, PostScript, PDF, XPS
Supported Media Sizes	A4, A5, B5
Supported Media Types	Plain, Bond, Cardstock, Labels, Envelopes
Operating System Compatibility	Windows, macOS, Linux