Xerox C8170 User Manual

Probable Causes Solutions
The paper is moist from humidity. Remove the paper from the tray, and replace it with
new dry paper.
Too much static electricity is present.
• Try a new ream of paper.
• Do not fan transparencies before loading in tray.
Using unsupported paper. Use only Xerox approved paper. For details, refer to
Supported Paper.
Humidity is too high for coated paper. Feed paper one sheet at a time.
JJaammss iinn tthhee DDooccuummeenntt FFeeeeddeerr
Probable Causes Solutions
Unsupported paper of the wrong size, thickness, or
type.
Use only Xerox-approved paper. For details, see
Supported Paper.
Originals are torn, previously stapled, bent, or folded. Ensure that the originals are not torn, bent, or folded.
If previously stapled, remove all staples and separate
the sheets by fanning them.
The documents loaded in the document feeder
exceed the maximum capacity allowed.
Place fewer documents in the document feeder.
Improperly adjusted document feeder guides. Adjust the paper guides to fit snugly against the
paper loaded in the document feeder.
298
Xerox
®
AltaLink
®
C81XX Series Color Multifunction Printer
User Guide
Troubleshooting

Xerox C8170 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Duplex Printing	Standard
Monthly Duty Cycle	Up to 300, 000 pages
Recommended Monthly Print Volume	Up to 50, 000 pages
Scan Resolution	600 x 600 dpi
Fax Speed	33.6 Kbps
Control Panel	10.1-inch color touchscreen
Print Speed	70 ppm
Print Resolution	1200 x 2400 dpi
Connectivity	USB, Ethernet, Wireless
PDL	PCL 6, PostScript, PDF, XPS
Supported Media Sizes	A4, A5, B5
Supported Media Types	Plain, Bond, Cardstock, Labels, Envelopes
Operating System Compatibility	Windows, macOS, Linux