Tools
ColorQube™ 9301/9302/9303
Administration and Accounting
270
Tools
The settings on the device can be setup using via two options, Internet Services or Tools. This guide
explains the options available in Tools. For information about the settings available in Internet
Services, refer to the System Administrator Guide.
These options should be setup and
customized by the System Administrator.
Therefore access to the Tools options is
passcode protected. Entry to the Tools
pathway is via the Machine Status
button on the control panel.
Accessing Tools
1. Press the Machine Status button.
2. Select the Tools tab.
To have access to all the Tools options
you must be logged in as an
Administrator.
3. Select Log In/Out and enter your
User Name and Password as directed.
The default user name and password
are: admin and 1111.
The Tools options are displayed.
Most Tools screens include the following buttons to confirm or cancel your choices:
• Undo resets the current screen to the values that were displayed when the screen was
opened.
• Cancel resets the screen and returns to the previous screen.
• Save saves the selections made and returns to the previous screen.
• Close closes the screen and returns to the previous screen.
To Next Page
Loading...
Need help?
General
