Troubleshooting
ColorQube™ 9301/9302/9303
Administration and Accounting
302
Automatic Light Lines Fix
Use this option to fix any Banding
problems.
• Quick Banding Fix corrects banding
temporarily and may slow print
speeds until a Full Banding Fix is
completed.
• On is used to correct banding
when it is detected.
• Off is selected if no action is
required.
• Full Fix takes approximately eight minutes to complete.
• Eco Fix is selected to correct banding when the device is not in use.
• Always Fix is selected to correct banding when it is detected.
• Off is selected if no action is required.
Resets
Use this option to reset the system
software.
• Software Reset on page 302
• Supply Counter Reset on page 303
Software Reset
Software Reset is faster and wastes less
consumables than switching the device off
then on.
• When instructed by the device to
perform a restart, choose a software
option and then select the Reset
button.
• All Software resets the whole
system software.
• Network Software resets the
network controller software.
To Next Page
Loading...
Need help?
General
