Device Settings
ColorQube™ 9301/9302/9303
Administration and Accounting
274
Audio Tones
The device generates three types of audio
tones to notify the user of an event that
has occurred at the device. Use this feature
to switch off or adjust the volume of each
of the tones.
• Fault Tone sounds when there is a
fault on the device. Select High,
Medium, Low or Off. Use the Test
option to hear the tone selected.
• Conflict Tone sounds when an
incorrect touch screen selection has
been made. Select High, Medium, Low or Off. Use the Tes t option to hear the tone selected.
• Selection Tone sounds when the device accepts your selection. Select High, Medium, Low or Off.
Use the Test option to hear the tone selected.
Paper Management
Select the Paper Management option to
access the following settings:
• Paper Type & Color on page 274
• Paper Substitution on page 275
• Paper Size Preference on page 275
• Tray Settings on page 275
• Tray Contents on page 276
Paper Type & Color
Allows the programing of the default
media type and color. This is usually the
most common media that is used in the
device and is the media that the device
feeds if a specific media type is not
selected.
• Select Plain or Recycled for the paper
type using the scroll bar.
• Select a paper color from the list
shown using the scroll bar. If the
required color is not shown, use the
Other option.
To Next Page
Loading...
Need help?
General
