FAX
1. Load the document.
2. Press the FAX mode button.
3. Select a feature by toggling between the 7
screens, then select an option, and press the
Enter button.
4. Use the numeric keypad on the control panel
to specify the destination. If a pause is
required, press the DIAL PAUSE button while
dialing the fax number.
5. Press the START button.
Refer to user guide for more information.
Xerox Website -
http://www.xerox.com
COPY
1. Load the document.
2. Press the COPY mode button.
3. Select a feature by toggling between the 3
screens, then select an option, and press the
Enter button.
4. Enter a copy quantity.
5. Press the START button.
If an error message occurs, the job is cancelled.
Fix the problem then reload all the documents and
press the START button.
Refer to user guide for more information.
Xerox Website -
http://www.xerox.com
E-MAIL
1. Load the document.
2. Press the E-MAIL mode button.
3. Select a feature by toggling between the 3
screens, then select an option, and press the
Enter button.
4. Enter an email address using the
alphanumeric keypad on the control panel.
5. Press the START button.
To send to multiple destinations in a single
operation, press the Next Address button.
Refer to user guide for more information.
Xerox Website -
http://www.xerox.com
To Next Page
Need help?
General