To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...
How to adjust print darkness on Xerox All in One Printer?
If the output from your Xerox All in One Printer is too light or too dark, try loading fresh paper and check the quality of the original document. You can also select the Lighten/Darken option on the touch screen. Run off more prints to see if the copy quality improves. If the issue persists, consider replacing the drum cartridge.
Why is my Xerox All in One Printer producing blank output?
If your Xerox All in One Printer is producing blank output, check that the document is loaded face up in the document feeder. If the drum cartridge is new, the toner may not be dispensing; try repeating the job. Ensure the seal tape has been removed from the new drum cartridge. Reinstall both the drum and toner cartridges. If problems persist, replace the drum cartridge, and if the screen prompts, replace the toner cartridge as well.
How to fix streaks, lines, or spots on Xerox All in One Printer output?
To address streaks, solid or dotted lines, or spots on your Xerox All in One Printer output, take the following steps: * Clean the document glass. * Clean the CVT glass. * Clean the areas under the platen cover. * Clean the document feeder and the paper guides. If the machine has been idle for a while or the toner or drum cartridge is new, repeat the job. Try running the job using the document glass. Reinstall the drum cartridge. Check the quality of the original document. Use the Border Erase feature to remove lines and marks from the document edges. Load fresh paper and check the humidity of the machine's location.
Why Xerox All in One Printer does not accept documents into memory?
If your Xerox All in One Printer is not accepting documents into memory, consult with the Key Operator regarding available memory. If the memory is nearly full, print and then delete any unnecessary files to free up space.
How to troubleshoot power issues on a Xerox All in One Printer?
If your Xerox All in One Printer won't power on, check the following: Ensure the power cord is properly connected. Verify the power switch is in the ON position. Check the RESET button on the back of the machine; if it's popped up, push it to reset. Finally, confirm the AC outlet is supplying voltage by connecting another appliance to it.
What to do if I cannot store a document for secure polling on my Xerox All in One Printer due to full memory?
If you cannot store a document for secure polling on your Xerox All in One Printer due to full memory, cancel the operation and try again later when additional memory is available.
What to do if my Xerox All in One Printer displays a memory full error message?
If your Xerox All in One Printer displays a memory full error message: * Check with the Key Operator about available memory. * Divide the remaining pages of the job into several small jobs and run the job again.
What to do if Xerox All in One Printer cannot store document due to full memory?
If you cannot store a document for secure polling on your Xerox All in One Printer due to full memory, cancel the operation and try again later when additional memory is available.
What to do if Xerox All in One Printer displays a memory full error?
If your Xerox All in One Printer displays a memory full error message, check with the Key Operator about available memory. To resolve this, divide the remaining pages of the job into several smaller jobs and run them again.
Why is the output from my Xerox All in One Printer too light or too dark?
General| Brand | Xerox |
|---|---|
| Model | CopyCentre C123 |
| Category | All in One Printer |
| Language | English |
