What to do if my Xerox All in One Printer output is washout?
If your Xerox All in One Printer output shows washout: * Check the quality of the documents. * If the image is lighter near the borders, select a darker image quality setting on the touch screen. * Replace the drum cartridge.
What to do if my Xerox All in One Printer output does not reflect the selections made on the touch screen?
If the output from your Xerox All in One Printer does not reflect the selections made on the touch screen, select [Save] after each selection on the touch screen, if one exists.
How to fix uneven print quality on Xerox All in One Printer?
To fix uneven print quality on your Xerox All in One Printer, try replacing the drum cartridge. If the screen displays a message for replacement, replace the toner cartridge as well.
What to do if Xerox All in One Printer document feeder not working?
If the document is not feeding through the document feeder on your Xerox All in One Printer, make sure that the document feeder is not overloaded. It can hold a maximum of 50 sheets. Also, check that the document is fully inserted into the document feeder.
What to do if Xerox All in One Printer cannot store document due to full memory?
If you cannot store a document for secure polling on your Xerox All in One Printer due to full memory, cancel the operation and try again later when additional memory is available.
What to do if my Xerox All in One Printer displays a memory full error message?
If your Xerox All in One Printer displays a memory full error message: * Check with the Key Operator about available memory. * Divide the remaining pages of the job into several small jobs and run the job again.
What to do if I cannot store a document for secure polling on my Xerox All in One Printer due to full memory?
If you cannot store a document for secure polling on your Xerox All in One Printer due to full memory, cancel the operation and try again later when additional memory is available.
How to troubleshoot power issues on a Xerox All in One Printer?
If your Xerox All in One Printer won't power on, check the following: Ensure the power cord is properly connected. Verify the power switch is in the ON position. Check the RESET button on the back of the machine; if it's popped up, push it to reset. Finally, confirm the AC outlet is supplying voltage by connecting another appliance to it.
Why Xerox All in One Printer does not accept documents into memory?
If your Xerox All in One Printer is not accepting documents into memory, consult with the Key Operator regarding available memory. If the memory is nearly full, print and then delete any unnecessary files to free up space.
How to fix streaks, lines, or spots on Xerox All in One Printer output?
To address streaks, solid or dotted lines, or spots on your Xerox All in One Printer output, take the following steps: * Clean the document glass. * Clean the CVT glass. * Clean the areas under the platen cover. * Clean the document feeder and the paper guides. If the machine has been idle for a while or the toner or drum cartridge is new, repeat the job. Try running the job using the document glass. Reinstall the drum cartridge. Check the quality of the original document. Use the Border Erase feature to remove lines and marks from the document edges. Load fresh paper and check the humidity of the machine's location.
General| Brand | Xerox |
|---|---|
| Model | CopyCentre C123 |
| Category | All in One Printer |
| Language | English |
Details the structure and content of the service manual.
Outlines the overall structure and arrangement of the manual's sections.
Provides guidance on navigating and utilizing the manual effectively.
Explains symbols, abbreviations, and technical terms used in the manual.
Lists safety warnings translated into multiple languages for user comprehension.
Steps to take at the beginning of a service call.
Describes the sequence of events during a service call.
In-depth procedures for specific maintenance tasks.
Instructions for cleaning various components of the machine.
Steps to complete after service work is finished.
Rapid Action Procedures for HDD-related errors.
Procedures for IPS-ESS communication errors.
Rapid Action Procedures for DADF errors.
Procedures for diagnosing and resolving image quality issues.
Visual examples and descriptions of common image defects.
Procedures for repairing or replacing drive components.
Instructions for servicing paper path and transport mechanisms.
Repair procedures related to the ROS (Raster Output Scanner) system.
Maintenance and repair for xerographic and developer units.
Lists part numbers for drive assemblies and components.
Identifies parts for the paper feed and transport systems.
Lists electrical parts, boards, and assemblies.
Guide on using the User Interface for diagnostics.
Procedures for reading and writing NVM (Non-Volatile Memory).
Various diagnostic procedures not covered elsewhere.
Common procedures applicable across various operations.
Identifies the physical locations of plugs and jacks on the machine.
Details wiring diagrams and connections for various systems.
Block Service Diagram information.
Information and installation for the Fax Kit accessory.
Details for foreign interface options or accessories.
To Next Page