Step 3: Network Setup 7
English (EN)
English (EN)
Protocols and Services Installed
The table below describes the default protocols and services installed on
the system.
Network Virtual Printers - Print Queues
The table below describes the default virtual printers which are available
from the Macintosh and PC clients.
Step 3: Network Setup
TCP/IP Setup
The following should only be performed if you need to change the default
settings (see Step 2 for the default settings).
1. In the Spire CX260 workspace, select Tools > Settings.
2. In the Network Setup parameter, click Change Settings in the TCP/IP
area.
Parameter Default Setting
Client for Microsoft Networks Enabled
File and Printer Sharing for Microsoft
Networks
Enabled
NetBEUI Protocol Enabled
NWLink BetBIOS Enabled
NWLink IPX/SPX/NetBIOS Compatible
Transport Protocol
Enabled
Network Monitor Driver Enabled
Internet Protocol (TCP/IP) Enabled: DHCP Yes
AppleTalk Protocol Enabled
Network Virtual Printers - Print Queues <hostname>_ProcessPrint
<hostname>_ProcessStore
<hostname>_SpoolStore
To Next Page
Loading...
