Xerox DocuColor 252

8 Quick Connect Guide
3. Select Use the following IP Address.
4. Type the new IP address, Subnet mask and Default gateway
(according to the Network Administrator).
5. If required, enter the DNS server addresses (according to the Network
Administrator).
6. Click OK.
7. Click OK in the Local Area Connections Properties window.
8. When prompted to restart your computer, click Yes.
AppleTalk Setup
The following should only be performed if you need to change the default
settings (see Step 2 for the default settings).
1. In the Spire CX260 workspace, select Tools > Settings.
2. In the Network Setup parameter, click Change Settings in the Apple
Talk se tup area.
The AppleTalk Protocol Properties window appears.
3. From the zone list, select the desired AppleTalk zone for your
computer, and click
OK.
IPX and Novell Client Setup
The following procedures are relevant for those customers who have a
Novell® network running IPX protocol.
Installing Novell Client on the Spire CX260
1. Close the Spire CX260 software.
2. Close all other open applications.
3. On the Windows desktop, click Start and select CX260 > CX260 Tools >
Novell Client Installation
.
4. Click Install; then click Reboot.
Note: For more detailed information, see the Creo Color Server for the Xerox
DocuColor 242/252/260 Printer/Copier Technical Manual (document number
731-01024A-EN) or the Creo Color Server for the Xerox DocuColor 242/252/260
Printer/Copier User Guide (document number 731-01023A-EN).