46 5 Troubleshooting
CAUTION
• When removing jammed paper, do not try to remove paper or paper piece deep inside the machine.
Also, do not try to remove paper wrapped around the heat roller. It can cause injury or burn. Switch off
the machine immediately and contact your local Fuji Xerox representative.
Important
• The fuser is hot. Do not touch areas with labels indicating high temperature and those surrounding the labels. Otherwise,
you can get burnt.
• Before opening the front cover or pulling out the paper trays, remove paper from the bypass tray (if any paper is loaded)
and close the bypass tray cover.
• Be careful not to pinch your fingers when closing a cover after removing jammed paper.
Note
• The labels with the following symbol provide jam clearance procedure. Use the labels also as guides when clearing paper
jams.
Paper clearance
instruction symbol
2
1
To Next Page
Loading...
Need help?
General