How to turn on Xerox DocuPrint C1110?
To switch on the Xerox Printer, press the power switch to the position. If it still doesn't turn on, switch the power off, plug the power cord firmly into the power connector or power outlet, and switch the power back on. Also, ensure the printer is connected to a power outlet that supplies the proper rated voltage or current and is not shared with other devices.
Why is the print output from my Xerox Printer too light?
If the output from your Xerox Printer is too light, try the following: Load fresh paper and ensure it is appropriate for the printer. If the toner save feature is enabled, disable the [Draft Mode] check box on the [Detailed Settings] tab in your print driver. Adjust the print density settings under the [Graphics] tab > [Image Settings] in your print driver. Also, try changing the [Paper Type] setting. For example, if it is set to [Heavyweight 1], change it to [Heavyweight 2]. Finally, ensure that the eight yellow tapes are properly removed from the drum cartridge.
What to do if the display is blank on Xerox DocuPrint C1110 Printer?
If the display on your Xerox Printer is blank, the printer may be in Power Saver mode. Press the button on the control panel to exit this mode. Check if the power cord is firmly plugged into the power outlet, and reboot the printer.
Why does my Xerox DocuPrint C1110 Printer produce smeared output?
If your Xerox Printer is producing smeared output, the paper path may not be clean. Print a couple of sheets to remove dirt from the paper path. You can also try cleaning the interior of the printer.
What does it mean when the Error lamp is lit on Xerox Printer?
When the lamp is lit on your Xerox Printer, follow the instructions in the message displayed and clear the error.
What to do if the Error lamp is blinking on Xerox Printer?
If the lamp is blinking on your Xerox Printer, copy down the error message or error code displayed on the control panel, switch the power off, unplug the power cord from the power outlet, and contact our Customer Support Center or your dealers.
Why does my Xerox DocuPrint C1110 Printer make odd noises?
Odd noises from your Xerox Printer can occur if the printer is not installed on a level surface, so move the printer to a level and sturdy surface. Also, ensure that the trays are pushed firmly into the printer. If there's an object causing the noise, switch the power off and remove the object. If the object cannot be removed without dismantling the printer, contact our Customer Support Center or your dealers.
How to speed up printing on Xerox DocuPrint C1110 Printer?
To improve print speed on your Xerox Printer, change the [Print Mode] setting to [Standard]. If you are using TrueType fonts, adjust the printing method under the [Detailed Settings] tab > [Font Settings] on your print driver.
How to remove dew condensation from Xerox DocuPrint C1110?
To remove dew condensation from your Xerox Printer, set the interval that the printer switches to the Sleep mode to more than 60 minutes on the control panel, and let the printer stand with its power on. The condensation should disappear after about an hour due to the heat inside the printer.
General| Print Technology | Laser |
|---|---|
| Print Resolution | 600 x 600 dpi |
| Paper Capacity | 250 sheets |
| Processor | 300 MHz |
| Duplex Printing | Manual |
| First Page Out Time (Black) | 14 seconds |
| Maximum Paper Size | A4 |
| Connectivity | USB 2.0 |
| Supported Media Sizes | A4, Letter, Legal, Executive, A5 |
| Printer Type | Color Laser |
| Network Connectivity | Ethernet |
| Operating System Compatibility | Windows, Mac |
Details precautions for safe electrical operation, grounding, and avoiding hazards.
Covers safe placement, ventilation, clearance, and environmental conditions for printer installation.
Outlines safe operating procedures, warnings about internal parts, and handling precautions.
Explains laser safety compliance and precautions to avoid eye injury.
Details how the printer can be used as a local or network printer and lists supported operating systems.
Explains how to configure the printer's IP address and network settings for TCP/IP communication.
Guides on installing and uninstalling print drivers and other software from the CD-ROM.
Identifies and describes the front and rear view components of the printer unit.
Provides instructions on how to properly turn the printer on and off.
Explains the function of the earth fault interrupter and how to test it.
Describes the Low Power and Sleep modes, and how to manually exit them.
Details how to cancel print jobs from the computer or control panel and how to check their status.
Outlines the basic procedure for sending print jobs from Windows applications.
Describes how to load and print on envelopes using Tray 1.
Explains how to load and register non-standard size paper in the manual feeder or Tray 1.
Details how to perform manual 2-sided printing using the manual feeder or Tray 1.
Explains the Secure Print feature for password-protected documents.
Describes the Sample Print feature for checking print results before printing multiple copies.
Covers printing PDF files directly using the PDF Bridge feature or commands.
Explains how to send e-mails to the printer for automatic printing of emails and attachments.
Discusses supported and unsupported paper types, and paper storage guidelines.
Details how to load paper into the manual feeder and Tray 1.
Lists the accessible menus and submenus from the control panel.
Provides detailed descriptions of each configurable item within the control panel menus.
Provides step-by-step procedures for clearing paper jams from different areas of the printer.
Addresses hardware-related issues such as power failures, unusual noises, and display blankness.
Discusses common printing issues like error lamps, slow printing, and incorrect margins.
Covers problems related to print quality, such as faded output, streaks, and smudges.
Addresses issues with paper not feeding properly, jams, or multiple sheets feeding at once.
Lists and explains common error messages displayed on the control panel and their remedies.
Details troubleshooting steps for network issues with CentreWare Internet Services and E-mail Print.
Explains how to program and use the printer in non-genuine mode.
Details how to replace toner cartridges, drum cartridges, fuser units, and feed rollers.
Explains how to print various reports and lists, such as printer settings and job history.
Guides on how to check meter readings and print counts on the control panel and via computer.
Describes how to use the SimpleMonitor tool to check printer and job status.
Explains how to monitor and manage the printer remotely using CentreWare Internet Services.
Details how to check printer status and receive notifications via email using StatusMessenger.
Covers various security features like control panel lock, secure print, and SSL/TLS encryption.
Explains user authentication and auditron administration for access control and usage tracking.
Guides on how to print the color registration chart and adjust color alignment.
Provides steps to adjust image transfer voltage for better print quality.
Explains how to adjust fuser temperature to resolve print quality issues.
Details how to adjust the printer's altitude setting for optimal performance in different locations.
Describes how to refresh toner cartridges to improve light printed images.
Explains how to perform drum cartridge refreshing to reduce light fatigue.
Guides on cleaning the developer to resolve printing issues like skewed images.
Provides instructions for cleaning the printer's exterior and internal components like feed rollers and CTD sensor.
Offers guidance on safely moving the printer, including precautions for handling and packing.
Lists the main technical specifications of the DocuPrint C1110 and C1110 B printers.
Lists the optional accessories available for the printer, such as memory and network cards.
Provides information on the expected life and page yields of printer consumables like toner and drum cartridges.
Guides on how to download the latest print driver and update the printer's firmware.
Explains how to install additional memory and check package contents.
Details procedures for handling paper jams that occur during 2-sided printing.
Lists important notes and restrictions related to using the printer, including manual feeder usage.
Provides definitions for terms and acronyms used throughout the manual.
To Next Page