Xerox DocuPrint C1110 User Manual

94 5 Control Panel Menus
Maintenance Mode
Use this menu to initialize the NVM, or to adjust the configurations for each type of paper.
mm / inch Set the unit for the custom paper size to millimeters (mm) or inches (").
• [Millimeters(mm)] (default)
Indicates length in millimeters (mm)
•[Inches(")]
Indicates length in inches (").
Interrupt Print Sets whether to interrupt the current print job if the printer receives data from the
scanner while it is printing.
• [On] (default)
Interrupts the current print job.
Temporarily stops receiving the data for the print job. The data that is already
received continues being printed, as soon as the printers buffer memory has enough
space to receive the print data from the scanner, the current print job is interrupted
and the data from the scanner is printed. This means that the data from the scanner
is printed in the middle of the current print job.
•[Off]
Does not interrupt the current print job.
The print data from the scanner is printed after the current print job and any print jobs
incoming from other ports are finished printing.
Print Priority Limits the number of pages that can be stored in the printer’s buffer memory. This
means that interrupt mode is quicker when [Interrupt Print] is set to [On].
• [Off] (default)
Number of pages is not limited.
When a print job from the scanner interrupts the current print job, print data already in
the printer's buffer memory continues to print until there is enough space for the print
data from the scanner. In this case, it may take a long time to print the print data from
the scanner if each page of the print data already in the buffer memory is small
because many pages need to be printed to open up enough space in the buffer
memory.
•[On]
Number of pages is limited.
The print data from the scanner prints quickly because the number of pages stored in
the printer’s buffer memory is limited. However, this may reduce the performance of
regular printing.
DefaultPaperSize Sets the default of [Paper Size] for the PDF print mode and the reports.
• [A4] (default)
• [8.5 x 11"]
Item Description
Adjust PaperType Sets the paper types of plain paper and labels.
• [Plain Paper] (default: [Heavyweight])
Selects the density for plain paper from [Lightweight] and [Heavyweight].
• [Labels] (default: [Heavyweight])
Selects the density for labels from [Lightweight] and [Heavyweight].
Adjust BTR Sets the value of the reference voltage for the transfer roller. You can specify the value
between -6 to 6 for each paper type.
• [Plain Paper] (default: [0])
• [Recycled Paper] (default: [0])
• [Bond Paper] (default: [0])
• [Heavyweight 1] (default: [0])
• [Heavyweight 2] (default: [0])
• [Labels] (default: [0])
• [Coated 1] (default: [0])
• [Coated 2] (default: [0])
• [Coated 3] (default: [0])
• [Envelope] (default: [0])
Item Description

Xerox DocuPrint C1110 Specifications

General

Brand	Xerox
Model	DocuPrint C1110
Category	Printer
Language	English