Why are images skewed when printing from my Xerox All in One Printer?
If images are skewed when printing from your Xerox All in One Printer, the paper guides might not be adjusted properly. Adjust the paper guides properly.
What to do if my Xerox All in One Printer is not on?
If your Xerox All in One Printer isn't turning on, there could be a few reasons: * The power switch might be off. Turn it on by pressing the side of the power switch. * The power cord may not be firmly plugged in. Turn off the printer, disconnect, and then reconnect the power cord to both the power outlet and the printer. Then, turn the printer back on. * The printer might not be getting the correct voltage. Ensure the printer is connected to a power outlet that supplies the proper rated voltage or current, and avoid sharing the outlet with other devices.
Why is my Xerox All in One Printer not printing?
If your Xerox All in One Printer is not printing, consider the following: * If connected via a parallel cable, check if your computer supports bi-directional communication. If not, disable it on the control panel and try printing again. * If connected to a network, verify that the printer's IP address is set correctly and re-configure if necessary. * The print job might be too large. If a single print file exceeds the memory capacity, divide the print file into smaller jobs.
What to do if my Xerox All in One Printer has a paper jam inside cover C?
If your Xerox All in One Printer has a paper jam inside cover C, open cover C and carefully remove the jammed paper.
What to do if my Xerox All in One Printer has a paper jam inside cover B?
If your Xerox All in One Printer (with optional duplex unit installed) has a paper jam inside cover B, pull the jammed paper straight upwards to remove it.
Why is the text garbled on my Xerox All in One Printer?
If the text is garbled on your Xerox All in One Printer, it could be due to the data being printed using a font that does not come standard with the printer. Check the font used by the application. If using PostScript, download fonts as necessary.
Why is the output partially blanked-out from my Xerox All in One Printer?
If the output from your Xerox All in One Printer is partially blanked-out or shows vertical white streaks, it could be due to: * The paper not being appropriate for the printer. Load appropriate media. * The printer's interior not being clean. Clean the interior of the printer.
Why is the text smeared when printing from my Xerox All in One Printer?
If the text is smeared when printing from your Xerox All in One Printer, it could be due to: * The paper not being appropriate for the printer. Load appropriate media. * The paper being damp. Load fresh paper.
What does it mean if the error lamp is lit on my Xerox All in One Printer?
If the lamp is lit on your Xerox All in One Printer, check the control panel for an error message. Follow the instructions provided in the message to clear the error.
Why does the Xerox All in One Printer print color documents in monochrome?
If your Xerox All in One Printer is printing color documents in monochrome, check if [Black & White] is selected for [Output Color] on the [Paper/Output] tab of the print driver. If so, change the [Output Color] setting to [Color].
General| Processor | 400 MHz |
|---|---|
| Printer Type | Laser |
| Duplex Printing | Automatic |
| Connectivity | USB, Ethernet |
| Media Sizes Supported | Letter, Legal, Executive, A4, A5 |
| Maximum Paper Size | Legal |
| Operating System Compatibility | Mac OS |
Details the printer's speed and print quality features.
Explains support for different paper sizes and media types.
Information on simplifying printer installation and initial configuration.
Lists various printing capabilities like multiple-up and booklet printing.
Highlights security functions like encryption and panel lock.
Explains the document's structure and chapter summaries.
Defines terms and explains symbols used throughout the guide.
Important safety instructions related to electrical connections and usage.
License information for RSA BSAFE encryption software.
Copyright and redistribution notice for Heimdal software.
Licensing details for LZMA SDK.
Details connectivity options and supported operating systems.
Procedure to configure the printer's IPv4 address.
Explains how to monitor and remotely configure the printer via a web browser.
Identifies and describes the main physical components of the printer unit.
Explains the printer's display screens for status and menus.
Explains how to enter low power and sleep modes to save energy.
Basic steps for sending print jobs from Windows applications to the printer.
Instructions on how to load envelopes for printing.
Guide for loading non-standard paper sizes into the bypass tray.
Explains methods to change paper type settings for trays.
Feature to send password-protected documents for secure printing.
Allows printing a proof copy before printing the rest of a multi-set job.
Feature to store print data and print it automatically at a preset time.
Steps to configure user ID for private charge print.
Method for printing PDF files using the PDF Bridge feature.
Steps to configure network and e-mail settings for printer.
Details supported and unsupported paper types, sizes, and storage guidelines.
Instructions on how to load paper into the bypass tray.
Explains the printer's control panel menu structure and common menus.
Configures emulation modes like ESC/P, HPGL, PDF, PCL, PostScript, XPS.
Information on ESC/P emulation settings.
Information on HP-GL/2 emulation settings.
Configures host interfaces and communication settings.
Settings for the optional parallel port.
Configures audio alerts for printer faults.
Settings for panel lock, passcode, and login attempts.
Configures behavior when selected paper tray is empty.
Defines action when loaded paper type doesn't match print job setting.
Adjusts the printer's gradation settings for better image quality.
Step-by-step instructions for clearing paper jams in various printer locations.
Lists common error messages with their causes and remedies.
Troubleshooting issues accessing or using CentreWare Internet Services.
Guides for replacing consumables like toner cartridges, drum cartridges, and fuser units.
Lists the different types of reports and lists the printer can generate.
How to check print counts based on output color.
Details the information provided by the e-mail notification service.
Overview of the printer's security features.
Steps to enable the audit log feature.
Explains data encryption for network communication.
Overview of user access control and administration features.
Basic steps for color calibration to adjust color density.
Instructions on cleaning the printer's outer surfaces.
Procedure for cleaning the printer's interior LED scanners.
Detailed technical specifications of the DocuPrint C2255 printer.
Information on the expected life of toner, drum, and fuser.
How to download the latest print driver from the web.
Lists notes and restrictions related to printer usage, hard disk, and settings.
Explains basic operations using the control panel buttons.
Lists the menus accessible to administrators for printer configuration.
To Next Page
