What does it mean if the error lamp is lit on my Xerox All in One Printer?
If the lamp is lit on your Xerox All in One Printer, check the control panel for an error message. Follow the instructions provided in the message to clear the error.
What to do if my Xerox All in One Printer has a paper jam inside cover A?
If your Xerox All in One Printer indicates a paper jam inside cover A, use the left side of the control panel to identify the precise location of the jam as described in the message, and then carefully remove the jammed paper.
Why does the Xerox All in One Printer print color documents in monochrome?
If your Xerox All in One Printer is printing color documents in monochrome, check if [Black & White] is selected for [Output Color] on the [Paper/Output] tab of the print driver. If so, change the [Output Color] setting to [Color].
What to do if printing can be rubbed off with a finger on Xerox All in One Printer?
If the toner smudges easily on your Xerox All in One Printer, it could be due to: * The selected paper type not being appropriate. Change the [Paper Type] setting and try printing again. * The paper being damp. Load fresh paper. * A damaged or deteriorated fuser unit. Depending on its condition, the fuser unit may need replacement.
Why does the Xerox All in One Printer make odd noise?
If your Xerox All in One Printer is making odd noises, check these potential causes: * Ensure the printer is installed on a level and sturdy surface. * Make sure the paper trays are pushed in completely. * Check for any foreign objects inside the printer. If you find one, switch off the power and remove the object. If you cannot remove it without dismantling the printer, contact Customer Support or your dealer.
Why does my Xerox All in One Printer display is blank?
If the display on your Xerox All in One Printer is blank, the printer may be in Energy Saver mode. Press the button on the control panel to exit Energy Saver mode.
Why is the output from my Xerox All in One Printer too light?
If the output from your Xerox All in One Printer is too light, consider the following: * The paper might be damp. Try loading fresh paper. * The paper might not be appropriate for the printer. Ensure you load appropriate media. * A drum cartridge or the fuser unit might be damaged or deteriorated and may need replacement depending on its condition. * The toner save feature may be enabled. On the [Advanced Settings] tab of your print driver, clear the [Draft Mode] check box.
What to do if my Xerox All in One Printer has a paper jam inside cover B?
If your Xerox All in One Printer (with optional duplex unit installed) has a paper jam inside cover B, pull the jammed paper straight upwards to remove it.
What to do if my Xerox All in One Printer has a paper jam inside cover C?
If your Xerox All in One Printer has a paper jam inside cover C, open cover C and carefully remove the jammed paper.
Why is my Xerox All in One Printer not printing?
If your Xerox All in One Printer is not printing, consider the following: * If connected via a parallel cable, check if your computer supports bi-directional communication. If not, disable it on the control panel and try printing again. * If connected to a network, verify that the printer's IP address is set correctly and re-configure if necessary. * The print job might be too large. If a single print file exceeds the memory capacity, divide the print file into smaller jobs.
General| Processor | 400 MHz |
|---|---|
| Printer Type | Laser |
| Duplex Printing | Automatic |
| Connectivity | USB, Ethernet |
| Media Sizes Supported | Letter, Legal, Executive, A4, A5 |
| Maximum Paper Size | Legal |
| Operating System Compatibility | Mac OS |
Details the printer's speed and print quality features.
Explains support for different paper sizes and media types.
Information on simplifying printer installation and initial configuration.
Lists various printing capabilities like multiple-up and booklet printing.
Highlights security functions like encryption and panel lock.
Explains the document's structure and chapter summaries.
Defines terms and explains symbols used throughout the guide.
Important safety instructions related to electrical connections and usage.
License information for RSA BSAFE encryption software.
Copyright and redistribution notice for Heimdal software.
Licensing details for LZMA SDK.
Details connectivity options and supported operating systems.
Procedure to configure the printer's IPv4 address.
Explains how to monitor and remotely configure the printer via a web browser.
Identifies and describes the main physical components of the printer unit.
Explains the printer's display screens for status and menus.
Explains how to enter low power and sleep modes to save energy.
Basic steps for sending print jobs from Windows applications to the printer.
Instructions on how to load envelopes for printing.
Guide for loading non-standard paper sizes into the bypass tray.
Explains methods to change paper type settings for trays.
Feature to send password-protected documents for secure printing.
Allows printing a proof copy before printing the rest of a multi-set job.
Feature to store print data and print it automatically at a preset time.
Steps to configure user ID for private charge print.
Method for printing PDF files using the PDF Bridge feature.
Steps to configure network and e-mail settings for printer.
Details supported and unsupported paper types, sizes, and storage guidelines.
Instructions on how to load paper into the bypass tray.
Explains the printer's control panel menu structure and common menus.
Configures emulation modes like ESC/P, HPGL, PDF, PCL, PostScript, XPS.
Information on ESC/P emulation settings.
Information on HP-GL/2 emulation settings.
Configures host interfaces and communication settings.
Settings for the optional parallel port.
Configures audio alerts for printer faults.
Settings for panel lock, passcode, and login attempts.
Configures behavior when selected paper tray is empty.
Defines action when loaded paper type doesn't match print job setting.
Adjusts the printer's gradation settings for better image quality.
Step-by-step instructions for clearing paper jams in various printer locations.
Lists common error messages with their causes and remedies.
Troubleshooting issues accessing or using CentreWare Internet Services.
Guides for replacing consumables like toner cartridges, drum cartridges, and fuser units.
Lists the different types of reports and lists the printer can generate.
How to check print counts based on output color.
Details the information provided by the e-mail notification service.
Overview of the printer's security features.
Steps to enable the audit log feature.
Explains data encryption for network communication.
Overview of user access control and administration features.
Basic steps for color calibration to adjust color density.
Instructions on cleaning the printer's outer surfaces.
Procedure for cleaning the printer's interior LED scanners.
Detailed technical specifications of the DocuPrint C2255 printer.
Information on the expected life of toner, drum, and fuser.
How to download the latest print driver from the web.
Lists notes and restrictions related to printer usage, hard disk, and settings.
Explains basic operations using the control panel buttons.
Lists the menus accessible to administrators for printer configuration.
To Next Page
