5.2 Common Menus Setting 139
[Menu Auto Clear]
[Low Power Mode]
[Low Power Timer]
System Settings
Menu Auto Clear
Setting Description
Menu Auto Clear Sets whether or not to automatically clear the menu display within 1 to 30
minutes in 1-minute increments. *2 (See P. 171.)
• [Off] (default)
• [1 Minutes] to [30 Minutes]
System Settings
Low Power Mode
Setting Description
Low Power Mode This feature automatically lowers the fuser temperature to save electricity
when the preset time has elapsed. Set whether or not to enable this feature.
• [Enabled] (default)
• [Disabled]
Note
• When [Sleep Mode] is set to [Disabled], [Low Power Mode] cannot be set to
[Disabled].
Refer to
• “2.4 Setting/Exiting the Energy Saver Modes” (P. 47)
System Settings
Low Power Timer
Setting Description
Low Power Timer Sets the time before the printer enters the Low Power mode. Specify the value
from 1 to 240 minutes in 1-minute increments. *2 (See P. 171.)
• [1 Minutes] (default)
Refer to
• “2.4 Setting/Exiting the Energy Saver Modes” (P. 47)