64 3 Print
Printing PDF Files without Using ContentsBridge Utility
(DocuPrint C1110 only)
PDF files can be sent directly to the printer using commands such as lpr and ftp instead of
ContentsBridge Utility. When printing using commands, the following [PDF] settings on the
control panel become effective.
Refer to
• "PDF" (P. 96)
Note
• When printing using lpr command, the print quantity must be set also using lpr command. In such case,
the [Quantity] setting on the control panel becomes invalid. If you do not specify the quantity using lpr
command, the printer recognizes the quantity as “1 set”.
To print PDF files using lpr or ftp command, you must enable the printer’s LPD or FTP port
on the control panel or CentreWare Internet Services (default: [Enable]).
Refer to
• "Protocol" (P. 90)
To Print PDF Files
The following explains how to print PDF files using lpr and ftp commands.
Note
• In the following examples, the characters entered are indicated in bold typeface.
• Spaces are indicated with .
Using lpr Command
Supported OS
Windows NT 4.0/Windows 2000/Windows XP (x32/x64)/Windows Server 2003 (x32/x64)/
Windows Vista (x32/x64)
Example
In a command prompt, enter a command as follows.
Example: A command for printing “event.pdf” when the printer’s IP address is
192.168.1.100.
• Quantity • Output Size
• Print Mode • Layout
• Password • Output Color
• Collated
To Next Page
Loading...
Need help?
General