Xerox DocuPrint 3055

5.2 Setting the Common Menus 113
[Bonjour]
Set whether to use the Multicast DNS feature.
Note
• [Bonjour] appears only when the network expansion card (optional) is installed.
[Ethernet]
Set the settings related to the Ethernet interface.
Network / Port
Bonjour
Bonjour
Port Status
Setting Item Description
Port Status Sets whether to enable or disable the Bonjour port at printer start-up.
• [Enable] (default)
• [Disable]
Note
• After changing this setting, reboot the printer.
Network / Port
Ethernet
Setting Item Description
Ethernet Sets the communication speed and connector type for the Ethernet interface.
• [Auto] (default)
Automatically detects 100 M (full duplex), 100 M (half duplex), 10 M (full
duplex), or 10 M (half duplex).
• [10M Half Duplex]
Uses 10 M (half duplex).
• [10M Full Duplex]
Uses 10 M (full duplex).
• [100M Half Duplex]
Uses 100 M (half duplex).
• [100M Full Duplex]
Uses 100 M (full duplex).
Note
• After changing this setting, reboot the printer.