Machine Description
Xerox Production Stacker 3-3
Operator Manual
Retracting the Stacker
Once the stacker has been unloaded, press the Stacker Unload button to retract the stacker.
Caution: Stay clear of the Stacker Tray when it is in motion.
If the Stacker Tray is full, the next stack is immediately picked up and ejected, repeating the
process.
Note
You can press the Stacker Unload button at any time to eject the stack (see Display Description).
Optional settings for the Stacker Unload operation are available through the Xerox Nuvera
Control Console. Refer to the Xerox Nuvera User Guide and Training Aid CD for more
information on setting the following:
• Auto or Manual Eject
• Stacker Limits
• Auto Switch
• Policy Unload
• Unload After
• Unload Height
To Next Page
Loading...
