Xerox Phaser 7700

18 Phaser 7700 Color Printer
Setting the Printer’s IP Address
DNS Setup Using CentreWare IS
After setting the printer’s IP address, you can set up the printer for DNS using
CentreWare IS.
1. Connect to the printer via CentreWare IS (see page 24).
2. On the right side of the main CentreWare IS page, click Properties.
3. In the Protocols group, click TCP/IP.
4. Under DNS Settings, select ON for Domain Name Service Resolver.
5. Enter the following information:
 Primary Name Server IP Address (required)
 Second Name Server IP Address (optional)
 IP Domain Name (required)
 Additional Search Domain Name(s) (optional)
6. When you are finished entering the settings, click Save Changes at the bottom of the
screen.
Note
New parameters will not take effect until the printer is reset.
Resetting the Printer Using CentreWare IS
1. Connect to the printer via CentreWare IS (see page 24).
2. On the right side of the main CentreWare IS page, click Properties.
3. Under the General tab, select Resets.
4. Click Reset Printer.
The printer will not update the web page until it finishes resetting.