©2017 Xerox Corporation. All rights reserved.
Xerox®, Xerox and Design® and VersaLink® are
trademarks of Xerox Corporation in the United States and/or other countries. BRxxxx
Note:
If you get this message while attempting a firmware upgrade, try the firmware upgrade later. A print job may be in progress and is
preventing the firmware upgrade.
Method 3: Upgrade from the Printer Control Panel
1. At the printer control panel, print a copy of the Configuration Report: see page 1 for instructions.
2. At the printer control panel, press the Home button.
3. Log in as Admin.
4. Touch Device > Software Update > Check Now.
5. Select the software Version.
6. Touch Install Now or Schedule.
Note:
If Check Now fails, set up the proxy server. Refer to the System Administrator Guide for instructions or follow the instructions for
Upgrade Software Manually, above.
To Previous Page
Loading...
