2. Open the Front Left and Center Doors.
3. Unlock and pull out the Transfer Drawer by turning the green 2 handle (at the center)
to the right until it is in the horizontal position. Pull the drawer straight out until it
stops.
4. Locate and lift up the green 2b lever to remove jammed paper from the registration
area.
5. If paper is jammed at the top of the Transfer Module, remove paper from the
registration roll (area 2a) by pulling it straight out.
Xerox
®
Versant
®
2100 Press10-30
User Guide
Problem Solving
To Next Page
Loading...
