2. Open the Output Module Front Right Door.
Do not pull out the Exit Module Drawer.
3. To clear the entrance baffle area (3a and 3b), lift the Upper Cooling 3a lever and
also rotate the 3b knob clockwise to advance the paper jammed in the Module
Entrance Roll. Ensure paper has completely moved through the roll beyond the
entrance area.
4. Rotate the 5d knob clockwise to advance paper and pull down on the 5c green lever
to remove any paper in this area.
Xerox
®
Versant
®
2100 Press10-32
User Guide
Problem Solving
To Next Page
Loading...
