Recommended SolutionPossible CauseFault Code
Check the properties of the tabs job and
resend the job.
Tabbed sheet fault049-700
Check the paper path of the module
and carefully remove all sheets from
the paper path areas.
Sheets remain in the paper
path
049-900 to 049-908
Open the HCS front door and remove
all sheets and paper scraps from jam
clearance areas. Close the front door.
HCS open door fault049-940
Check the position of the Stacker cart.Stacker Cart fault049-941
Remove paper from the Top Tray.Stacker Top Tray fault049-945
Remove paper from the Stacker Tray.Stacker Tray fault049-960, 049-964
Open the HCS front door and remove
any paper from the Stacker cart. Close
the door to resume operation.
Stacker Full Detection fault049-965 to 049-972
Open the HCS front door and remove
any paper from the Stacker cart. Close
the door to resume operation.
HCS falsely detects that the
Paper Unload button is pressed
049-973
HCS Jam Clearance
Jam Clearance Tips
Tip
Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your print jobs.
Note
Remedies differ according to the paper jam location. Follow the instructions displayed
to remove the jammed paper.
15-5Xerox
®
Versant
®
2100 Press
User Guide
High Capacity Stacker (HCS)
To Next Page
Loading...
