Xerox Versant 2100 - Page 24

The AdvancedPunch Pro also provides additional capabilities such as the following:
• A bigger range of media sizes and types
• LEF and SEF punching
• 2-up punching (double punch) on large sheets
• Quick-change die sets that can be interchanged without any tools
• All die sets include an Identification Label providing the user with the hole pattern
and name
Information on this device can be found later in this guide. Information can also be
found on the customer documentation CD that came with the accessory, or it can be
downloaded from www.xerox.com.
High Capacity Stacker
The High Capacity Stacker (HCS) is an optional finishing device that provides production
stacking and offsetting capabilities of up to 5,000 sheets to a cart in the Stacker Tray.
Shorter runs of up to 500 sheets can be sent to the stacker’s Top Tray.
Standard Finisher
This finisher provides a wide range of finishing / folding options. It includes a basic inline
punch, stapler, built-in decurler and interposer.
Note
The Standard Finisher is shown here with the required Interface Module and with the
optional C / Z Folder.
Booklet Maker Finisher
This finisher provides a wide range of finishing/folding options that include a basic inline
punch, stapler, a booklet unit with saddle-stitching and bifold finishing.
Xerox
®
Versant
®
2100 Press1-12
User Guide
Product Overview