4
Paper and Other Media
Paper and Other Media Overview
This section describes how to load specific stocks into the various feeder trays.
Before loading paper, consider the following:
• To define attributes for a stock, add a new stock to the Stock Library, or assign a stock
to a paper tray for the print job, access the Stock Library Manager on the print server.
If you have restricted access, contact your System Administrator.
Note
The Stock Library Manager is an application that is loaded onto the print server and
is used to manage the stocks and paper trays for your press. By default, the Stock
Library feature is available to both the operator and system administrator modes.
Your System Administrator may restrict user access to change or add stocks. When
you are loading paper, the Stock Library Manager application opens the Tray
Properties window for that tray and you can view or change the stock assigned to
that tray.
• The press supports the ability to pull different stock sizes and paper types from various
trays and assemble them as part of a single job. To select multiple paper trays and
insert different papers within one job, program this custom job at the print server
using features such as special pages.
• The press supports Automatic Tray Switching, which allows a job to switch
automatically from an empty tray to a full tray containing the same size paper,
orientation and stock type. Refer to the System Administrator Guide for how to enable
this feature and prioritize the order of trays to search on and use.
4-1Xerox
®
Versant
®
2100 Press
User Guide
To Next Page
Loading...
