The lithium battery in this printer contains Perchlorate material. For information about the special
handling procedures associated with Perchlorate material, refer to www.dtsc.ca.gov/hazardouswaste/
perchlorate.
WARNING: If the battery on a circuit board is installed incorrectly, there is a risk of explosion.
EEnnvviirroonnmmeennttaall,, HHeeaalltthh,, aanndd SSaaffeettyy CCoonnttaacctt IInnffoorrmmaattiioonn
For more information on Environment, Health, and Safety in relation to this Xerox
®
product and
supplies, contact the following:
• United States and Canada: 1-800-ASK-XEROX (1-800-275-9376)
• Email request to Europe: EHS-Europe@xerox.com.
• Web address: www.xerox.com/environment or www.xerox.com/environment_europe.
PPrreessss OOvveerrvviieeww
The Xerox
®
Versant
®
4100 Press is a full color or black and white, auto-duplex press that operates at a
speed of 100 prints per minute, when printing on 8.5 x 11 inch or A4 paper.
The system configuration consists of the Advanced Oversized High Capacity Feeder (Trays 6 and 7),
the print engine with internal feeding trays (Trays 1-3), and an embedded Control Panel and touch
screen (the user interface). A print server is also part of the configuration, which includes the
PredictPrint Media Manager application used for stock and tray setup, and print job submission. An
Offset Catch Tray can be connected to the press or other optional inline finishing devices are
available.
Note: With the exception of the Offset Catch Tray, all other finishing devices require the
Interface Decurler Module.
The press includes the 4 dry ink/toner and drum cartridges, transfer belt and fuser or ROS system, Full
Width Array calibration feature, decurler, registration and paper path, and paper inverter.
10
To Next Page
Loading...
Need help?
General
