Why are there smears, lines, marks or spots on Xerox WorkCentre 4118 All in One Printer copies?
Smears, lines, marks, or spots on copies from your Xerox All in One Printer can occur if the Document Glass or Document Feeder is dirty, so clean them. Also, check your original document for any defects.
Why Xerox WorkCentre 4118 All in One Printer produces irregular faded patches?
Irregular faded patches on your Xerox All in One Printer outputs may be due to unevenly distributed toner or the paper quality. To resolve this: * Remove the toner cartridge. * Shake it gently to distribute the toner evenly. * Reinstall the toner cartridge. Also, ensure the paper used in the machine meets the specifications provided in the User Guide.
What to do if Xerox WorkCentre 4118 makes grinding noise at power up?
If your Xerox All in One Printer is making a grinding noise when you power it up, it could be due to the Scan Lock being engaged or packing material remaining in the trays. First, power down the printer and locate the Scan Lock switch on the underside of the scanner, ensure that the Scan Lock has been moved to the unlock position. Then, remove any remaining packing material from the trays.
General| Print Technology | Laser |
|---|---|
| Print Speed | 18 ppm |
| Max Print Resolution | 600 x 600 dpi |
| Copy Speed | 18 cpm |
| Max Copy Resolution | 600 x 600 dpi |
| Fax Transmission Speed | 33.6 Kbps |
| Paper Capacity | 250 sheets |
| Functions | Print, Copy, Scan, Fax |
| Duplex Printing | Manual |
| Memory (Standard) | 64 MB |
| Connectivity | USB 2.0 |
| Supported Operating Systems | Windows, Mac |
To Next Page
