What to do if my Xerox WorkCentre 3119 stops printing due to toner empty notification?
If your Xerox All in One Printer stops printing because the toner is empty, replace the toner cartridge with a new one. See page 8.4.
What to do if Xerox WorkCentre 3119 toner is almost empty?
If the toner is almost empty in your Xerox All in One Printer, take out the toner cartridge and gently shake it. This may temporarily allow you to continue printing.
How to fix frequent paper jams on Xerox WorkCentre 3119?
To resolve frequent copy paper jams in your Xerox All in One Printer, fan the stack of paper, turn it over in the paper input tray, and replace the paper with a fresh supply. Also, check and adjust the paper guides if needed.
How to replace toner cartridge in Xerox All in One Printer?
If the toner cartridge has run out in your Xerox All in One Printer, remove the old toner cartridge and install a new one. See page 8.4.
What to do if my Xerox WorkCentre 3119 All in One Printer shows invalid cartridge error?
If your Xerox All in One Printer displays an invalid cartridge error, you must use a Xerox approved cartridge.
Why Xerox WorkCentre 3119 All in One Printer prints blank pages?
If pages print but are blank from your Xerox All in One Printer: * Redistribute the toner or replace the toner cartridge if it's defective or out of toner. See page 8.3. * Check the file for blank pages. * If the problem persists, there may be defective parts, and it is best to contact a service representative.
How to fix horizontal stripes during scanning on Xerox All in One Printer?
To resolve horizontal stripes appearing during scanning with your Xerox All in One Printer: * Remove the toner cartridge and reinsert it. * If that doesn't work, replace the toner cartridge with a new one. See page 8.4. * If the problem continues, the machine may require repair, so contact a service representative.
What to do if Xerox All in One Printer power failure occurred?
If your Xerox All in One Printer experiences a power failure, the job you were trying to do before the power failure must be completely re-done.
What to do if Xerox All in One Printer scanner error occurred?
If a scanner error occurs on your Xerox All in One Printer, unplug the power cord and plug it back in. If the problem persists, please call for service.
What to do if Xerox WorkCentre 3119 front cover is not securely latched?
If the front or rear cover of your Xerox All in One Printer is not securely latched, close the cover until it locks into place.
General| Print Technology | Laser |
|---|---|
| Print Speed | 19 ppm |
| Print Resolution | 600 x 600 dpi |
| Copy Speed | 19 cpm |
| Copy Resolution | 600 x 600 dpi |
| Paper Capacity | 250 sheets |
| Connectivity | USB 2.0 |
| Functions | Print, Copy, Scan |
| Scanner Type | Flatbed |
| Memory (Standard) | 32 MB |
| Operating System Compatibility | Windows, Mac |
Step-by-step instructions for initial machine setup, connections, and power.
Basic steps for making copies using the document glass and control panel.
Overview of how the machine converts images and text into digital files.
Information on available toner cartridge types, yield, and part numbers.
Guidelines for toner cartridge storage, saving toner, and redistributing toner.
Instructions for locating and removing jammed paper from various areas of the machine.
Lists common issues like paper feeding and printing problems with solutions.
Step-by-step guide for installing the printer driver and software on a Windows PC.
General steps for printing a document from a Windows application.
How to scan using third-party TWAIN-compliant applications.
Instructions for scanning using the Windows Image Acquisition driver.
Detailed steps for installing the printer and scanner drivers on Linux.
To Next Page
