Introduction
1.
3
Control panel functions
1
Displays the current status and prompts during an operation.
2
Shows the status of your machine. See page 9.3.
3
Enters Menu mode and scrolls through the available menus.
4
Scroll through the options available in the selected menu.
5
Confirms the selection on the display.
6
Sends you back to the upper menu level.
7
Allows you to enter the number of copies.
8
Stops an operation at any time.
In Standby mode, clears/cancels the copy options, such as the resolution, the document type setting, the copy size, and the
number of copies.
9
Starts a job.
To Next Page
Loading...
Need help?
General
