How to resolve document feeder jams in Xerox WorkCentre 5335?
Document feeder jams in your Xerox All in One Printer can occur due to: * Unsupported media. Use only Xerox-approved media. * Exceeding the document feeder's capacity. Place fewer documents in the feeder. * Improperly adjusted document feeder guides. Ensure the media guides fit snugly against the media.
What causes duplex unit jams on Xerox WorkCentre 5335 All in One Printer?
Duplex unit jams on your Xerox All in One Printer can be caused by using unsupported media of the wrong size, thickness, or type. Use only Xerox-approved media. Also, recheck the media path inside the duplex module, remove any jammed paper, ensure you have not mixed media types in the tray, and avoid printing envelopes, labels, or extra heavyweight paper 2-sided.
General| Type | Multifunction Printer |
|---|---|
| Functions | Print, Copy, Scan, Fax |
| Print Technology | Laser |
| Print Speed (Black) | 35 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Copy Speed | 35 cpm |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Duplex Printing | Automatic |
| Memory (Standard) | 1 GB |
| Scan Destinations | Email, Network Folder, USB |
| Fax Speed | 33.6 Kbps |
| Monthly Duty Cycle | 100, 000 pages |
| Hard Drive | 80 GB |
| Connectivity | USB, Ethernet |
To Next Page