WorkCentre
TM
5325/5330/5335
Detailed Specifi cations 12
Xerox Extensible Interface Platform
®
(EIP)
Xerox EIP is a software platform inside the WorkCentre 5300 series that enables personalised solutions you can
access right from the device touch screen. These applications can leverage your existing databases and meet
your specific business challenges.
Basic Configurations
Copier: Copier/Printer/Scanner:
WorkCentre 5325/5330/5335 with 2 Tray and
Stand
WorkCentre 5325/5330/5335 with 2 Tray and Stand
WorkCentre 5325/5330/5335 with 2 Tray and
High-Capacity Tandem Tray Module
WorkCentre 5325/5330/5335 with 2 Tray and High-Capacity
Tandem Tray Module
Optional Accessories
Hardware Options
One-line or three-line PSTN Fax with Internet Fax
Integrated Office Finisher
Office Finisher LX
Booklet Maker for Office Finisher LX
2 and 4 Hole Punch for Office Finisher LX
Envelope Tray (replaces tray 1)
2000 Sheet High Capacity Feeder
Work Surface
Tray Lock Kit
Wireless Network Adaptor
Foreign Device Interface
Convenience Stapler
Controller Options
Network Scan Kit
Adobe Postscript 3 Kit (Required for Mac printing)
Fax over IP Kit
Server Fax Enablement Kit
Network Accounting Enablement Kit
Thumbnail Preview Kit
Searchable PDF Kit
Copier Upgrade Kit (Copier to Copy / Print and Scan configuration)
Software Options
Scan to PC Desktop
®
(Professional or SE edition)
Xerox Secure Access Unified ID System
®
Xerox Mobile Print Solution
Electrical
Input Voltage 220–240 V Nominal, 50/60 Hz, 8A
Warm Up 40 seconds (maximum)
Low-Power Recovery 12 seconds (maximum)
Required Temperature
Range
10° to 32° C
Required Relative
Humidity
15 to 85%
To Next Page
Loading...
Need help?
General
