Page 12 Quick Use Guide
Getting Started
Power On or Off
¾ If [Power Down] is selected the Power Down Confirmation screen displays a warning that
data may be lost if the machine is powered down.
NOTE: Confirmation of this screen will result in the deletion of any jobs currently in the
queue.
¾ Touch the [Confirm] button to power off the machine.
NOTE: The machine remains on for approximately 45 seconds before the power is
terminated.
¾ If [Enter Power Saver Mode] is selected, the machine will immediately enter the Power
Saver Mode appropriate to its configuration. If there are any jobs in the queue, a second
pop-up screen displays.
NOTE: To re-activate the machine when in this mode, touch a button on the Touch Screen or
control panel.
¾ If [Quick Restart] is selected and confirmed the machine will restart. A pop-up screen will
appear warning that any jobs in the queue will be deleted.
NOTE: Any copy jobs in the queue will be deleted, print jobs in the queue are recovered.
¾ If [Cancel] is selected the power down options will be canceled and the machine will be
available for use.
To power ON:
¾ Press the [Power] switch. The entire powering on
process (to power on all installed options) takes less
than 165 seconds.
NOTE: Certain functions of the machine e.g. copying
and scanning will be available before others.
To Next Page
Loading...
Need help?
General
