1
Services Home
2
Job Status
3
Touch Screen
4
Start
5
Clear All
6
Stop
Control panel
Or
Document feeder option
Document glass option
©2014 Xerox Corporation. All rights reserved. Xerox
®
and Xerox and Design
®
are trademarks of Xerox Corporation in the United States and/or other countries.
BR7341
For more information
Please refer to the user guide -
available at
http://www.support.xerox.com
Xerox
®
WorkCentre™ 5945/5955 Multifunction Printer
1
2
3
4
5
6
How to send a server fax
Load your documents face up in the document feeder input tray. Adjust the guide to just touch the documents.1.
Or
Lift up the document feeder. Place the document face down onto the document glass and register it to the arrow at the
top left corner. Close the document feeder.
Press the 2.
Clear All button on the control panel to cancel any previous programming selections.
Press the 3. Services Home button.
Select the 4. Server Fax button.
If required, select the 5. Server Fax tab. This is usually the active tab when the Server Fax service opens.
Select the 6.
Enter Fax Number entry box and use the numeric keypad, or the touch screen keypad to enter the recipient’s
fax number.
Select the 7.
Add button.
If you want to send the document to more than one recipient enter the additional details, one recipient at a time, •
and select the
Add button again until all the recipients have been added.
Select the 8.
Close button to save the information you entered.
Select any options required.9.
Press the 10.
Start button on the control panel to scan the original.
To Next Page
Loading...
Need help?
General
