12
5.20.3 Send SMS
shake+password+space+10
is
the strongest
level of intensity.
the
tracker
will
send
alert
if
someone touchs the unit slightly.
5.20.4
Cancel: Send SMS shake+password+space+0
to
remove
this
function.
5.21
SD
card
function
A mini SD card can be put in the tracker’s SD card slot. The GPRS data can be saved in
the
SD
card
if
GPRS
is
off.
It
will
send
data
to
the
GPRS
server
again
if
GPRS
is
on.
5.21.1 Setup: Send SMS sdlog123456 1 to the tracker to activate the function of storing
data in SD card;
Cancel: Send SMS sdlog+password+0 to the tracker to deactivate the function of
storing data in SD card.
5.21.2 Setup:
Send
SMS
readsd+password+space+1
to
ask
the
tracker
to
send
data
in
the
SD
card
to
the GPRS
server.
Cancel: Send SMS readsd+password+space+0
to
ask
the
tracker
to
stop
sending
data
in
the
SD
card
to
the server.
5.22 GPRS Setting
In order to use GPRS function, the user needs to set IP, Port and APN ( access point
name ) by either cell phone, or our PC software.
（ NOTE: Some countries or regions should set APN ’s User Name and APN ’s
Password.）
5.22.1 Set an IP address and port:
Setup: Send SMS adminip+123456+space+IP address+space+port.
If setup successful, the tracker will reply SMS “adminip ok”
Cancel: Send SMS noadminip+123456
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
To Next Page
Loading...
