Xexun TK-103 User Manual

1
GPS VEHICLE TRACKER
USER MANUAL
Preface
Thank you for purchasing GPS Vehicle Tracker. This manual shows how to operate the device
smoothly and correctly. Make sure to read this manual carefully before using this product. Please note
that specification and information are subject to changes without prior notice in this manual. Any
change will be integrated in the latest release. The manufacturer assumes no responsibility for any
errors or omissions in this document.

Xexun TK-103 Specifications

General

Dimensions	90mm x 50mm x 20mm
Weight	100g
GPS Chipset	SIRF Star III
Network	GSM/GPRS
GSM Frequency	850/900/1800/1900MHz
GPS Sensitivity	-159dBm
GPS Accuracy	5m
Voltage	3.7V
Standby Current	10mA
Storage Temperature	-40°C to +85°C
Operating Temperature	-20°C to +55°C
Standby Time	120 hours
SOS Button	Yes
Geo-fence	Yes
Voice Monitoring	Yes
History Playback	Yes
Battery	3.7V Li-ion
Power Supply	DC 5V
Time To First Fix	Cold start: 45s, Warm start: 35s, Hot start: 1s

Summary

Preface

Summary

Application

Hardware Description

Connectors

Identifies and explains the various connectors on the device.

Wires Connection

Explains the correct procedure for connecting the device's wires.

External Relay Connection

Details the connection process for an external relay.

Specification

SIM Card Installation

Startup

Usage

Fortifying Mode

Engine Started Alert

Configures alerts for when the vehicle's engine is started.

Movement Alert

Sets up alerts for when the tracker moves from a designated area.

Power Cutoff Alert

Notifies the user if the device's power supply is unexpectedly cut.

Application in the Car Alarm System

Explains how to integrate the tracker with a car alarm system.

Checking the Working Status

Instructions on how to verify the tracker's current operating mode.

Tracking Mode

Initialization

Steps required to prepare the tracker for operation.

Change the Password

Procedure for modifying the device's access password.

Authorization

Manages authorized phone numbers that can control the device.

Auto-Track

Configuration for receiving periodic location updates via SMS.

Geo-fence

Setting up virtual geographical boundaries for movement alerts.

Movement Alert

Alerts when the tracker moves out of a pre-defined restricted zone.

Overspeed Alert

Configures the device to alert when a speed limit is exceeded.

IMEI Checking

How to retrieve the device's unique IMEI number.

SOS Button

Explains the function and usage of the emergency SOS button.

Low Battery Alert

Notifies the user when the device's battery level is low.

SMS Center

Setting up a designated SMS center for specific notifications.

Monitoring Mode

Remote Oil&Electricity Cut-off Function

GPRS Setting

Set an IP address and port

Configures the IP address and port for GPRS data transmission.

Set APN

Specifies the Access Point Name (APN) for GPRS connectivity.

Set APN's User Name

Sets the username required for APN authentication.

Set APN's Password

Sets the password required for APN authentication.

GPRS transport protocols

Information on supported GPRS protocols and data format.

Cautions

Faults & The solutions