EasyManua.ls Logo

Xexun TK-103 - Set APN; Set APNs User Name; Set APNs Password; GPRS transport protocols

Xexun TK-103
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
Cancel: Send SMS noadminip+123456
12.2 Set APN
Setup: Send SMS apn+123456+space+specify apn content.
If setup successful, the tracker will reply SMS “APN ok”.
Cancel: The old APN will be invalid automatically when a new APN is set.
12.3 Set APN’s User Name
Setup: Send SMS apnuser+123456+space+the APN’s user name.
If setup successful, the tracker will reply SMS “apnuser ok”.
Cancel: The old APN user name will be invalid automatically when a new APN uer
name is set.
12.4 Set APN’s Password
Setup: Send SMS apnpasswd+123456+space+the APN’s password.
If setup successful, the tracker will reply SMS “apnpassword ok”.
Cancel: The old APN password will be invalid automatically when a new APN password
is set.
12.5 GPRS transport protocols
As soon as the IP & Port & APN are set up, the user can make a call or send SMS to
tracker. The tracker will hand up and report the coordinates to IP address.
The message format sent by tracker to IP address is as following:
Serial number + authorized number + GPRMC + GPS signal indicator + command +
IMEI number + CRC16 checksum.
For example:
090907070718,13145826175,GPRMC,070718.000,A,2234.0228,N,11403.0764,E,0.00
,,070909,,,A*73,F,helpme,imei:354776030042714,132,40512
090907070718== serial number(date&time)

Related product manuals