Xexun TK-103 - Engine Started Alert; Movement Alert; Power Cutoff Alert

7
flash every 4 seconds when the “protection “ is activated.
While
the “protection” will be deactivated when you dial up the tracker again, the indicator
will flash every 1 second when the deactivation is done.
Remark: If ACC is connected, then you can not activate the “protection” for your car. The
tracker will be triggered to send an alert under one of following conditions:
8.1 Engine Started Alert
In fortifying mode, the tracker will start the ACC examine automatically. It will warn up
the user when the engine is started.
Alert SMS format: fortify! + lat./long.
It
will keep sending such an alert every 3 minutes, you can send”fortify123456” to stop
it.
8.2 Movement Alert
This function is using for the owner to get an alert when the tracker
moves out of a
restricted district (500m radius),
Response SMS format: moved!+lat./long..
It will keep sending such an alert every 3 minutes, you can send”fortify123456” to stop
it.
8.3 Power Cutoff Alert
In this mode, the tracker will warn up the user automatically when the main power is cut
off unwontedly,such as if someone cut the wire connected the car with the device, it will
alert “Battery with coordinates”.
Alert SMS format: battery! + lat./long.