EasyManua.ls Logo

Xexun TK-103 - Application in the Car Alarm System; Checking the Working Status; Tracking Mode; Initialization

Xexun TK-103
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
It
will
keep
sending
such
an
alert
every
3
minutes,
you
can
send”fortify123456”
to
stop
it.
NOTE:
These
three
alerts
only
occurred
when
the
protection
is
activated
in
fortifying
mode.
8.4
Application in the Car Alarm System
If your car is equipped with a car alarm system,you can connect the white wire(re.3.2
wire4) to the positive wire of microphone on the car alarm.The authorized number will
receive an alert if the car alarm sounds more than 10 seconds
.
Alert
SMS
format:
lat: 22.567835N long: 114.051397E speed: 000.0 23/12/09 01:55 bat:F Signal:F Trigger
imei:356895033307722
8.5
Checking
the
Working
Status
(
fortify
or
no
fortify
)
You
can
send
SMS
command
“fortified123456”
to
tracker,
it
will
report
fortifying
or
no
fortify
to
you.
Reply “no fortify” means out of Fortifying mode, Reply “fortifying” means under Fortifying
mode.
When the tracker is in tracking mode or monitoring mode, send a SMS command
"fortify123456" to switch to the "Fortifying mode", under fortifying mode, make a call to
activate the protection of your loved ones or car
9 Tracking Mode
9.1 Initialization
Send SMS “begin+password” to the unit, it will reply “begin ok” and initialize all the

Related product manuals