Xexun TK-103 - Auto-Track; Geo-fence

10
imei:354776031555474
Lat: 22.566901 long: 114.051258 ==Coordinate
0.00
== speed
14/08/09 06.54 == Date&Time
bat:F == battery power is full,while ‘L’means battery power is low
Signal:F == Full GPS signal ‘L’ means no GPS signal
help me == the SOS message, this section is blank for tracking message
354776031555474 == IMEI
9.4 Auto-Track
This function is using for the user to receive SMS with Geo-info in a certain time.
9.4.1 Set up: Send SMS t030s005n+password to the unit, it will report the Geo-info at
30s intervals for 5 times.(s: second, m: minute, h: hour).
You will receive a reply as
“
t030s005n OK” if the setting is successful .The setting must be in 3 digits and at
maximum 255 in value.
9.4.2 Send SMS t030s***n+password to the unit, it will reply SMS heaps of times.
You
will receive a reply as “ t030s***n ok” if the setting is successful .
9.4.3 Cancel: Send notn+password to delete the “ auto track “.
Remark: the interval must not be less than 30s.
9.5 Geo-fence
Set up a geo-fence for the unit to restrict its movement within a district. The unit will
send message to the authorized numbers when it moves out of this district.
Notes: This function will be invalid if the unit moves outside the district. You need to
re-set it if you want this function again.